一、在服務業中的應用：日常生產中，眼鏡、首飾都可以用超聲波進行清洗，速度快，無損傷，大型的賓館、飯店用它清洗餐具，不僅清洗效果好，還具有殺滅病毒的作用。

1、 Application in the service industry: In daily production, glasses and jewelry can be cleaned using ultrasound, which is fast and non-destructive. Large hotels and restaurants use it to clean tableware, not only with good cleaning effect, but also with the function of killing viruses.

二、超聲波在微粉業的應用：眾所周知，要取得不同大小的顆粒，是把破碎料放在球磨機內研磨后，經過不同規格篩子層層篩分而得的。篩子長時間使用后，篩孔會被堵塞（如金剛石篩），用其它方法刷洗會破壞篩子，且效果不理想，經過眾多廠家的試驗后，用超聲波清洗機，不僅不損壞篩子，而且篩子上面的堵塞顆粒完全被回收。

2、 The application of ultrasound in the micro powder industry: As is well known, to obtain particles of different sizes, the crushed material is ground in a ball mill and screened layer by layer through different specifications of sieves. After long-term use, the sieve holes will be blocked (such as diamond screens), and brushing with other methods will damage the sieve, and the effect is not ideal. After many manufacturers have tested it, using an ultrasonic cleaning machine not only does not damage the sieve, but also the blocked particles on the sieve are completely recovered.

三、超聲波在制藥工業的應用：超聲波清洗技術經過眾多制藥企業的應用而得到廣泛使用，特別是對西林瓶、口服液瓶、安瓶、大輸液瓶的清洗以及對丁基膠塞、天然膠塞的清洗方面，已經得到首肯。對于瓶類的清洗，是用超聲波清洗技術代替原有的毛刷機，它經過翻轉注水、超聲清洗、內外沖洗、空氣吹干、翻轉等流程而實現的。

3、 The application of ultrasound in the pharmaceutical industry: Ultrasonic cleaning technology has been widely used by many pharmaceutical companies, especially in the cleaning of penicillin bottles, oral liquid bottles, ampoules, and large infusion bottles, as well as the cleaning of butyl rubber stoppers and natural rubber stoppers, and has been approved. For bottle cleaning, ultrasonic cleaning technology is used instead of the original brush machine, which is achieved through processes such as flipping water injection, ultrasonic cleaning, internal and external flushing, air drying, flipping, etc.

四、超聲對濾芯的清洗：我們知道，無論何種材質的過濾器或無論何種用途的過濾器，使用一段時間后，都會由于雜質而造成通透性降低而報廢，普通濾芯價格較低還可以，但對于化纖行業，一只進口濾芯，價格近萬元，棄之實在可惜，我們同其它科研單位合作研制的超聲波濾芯清洗機，采用聚能型超聲波清洗機，它可把1KW以上的能量集中在200×20mm2 的輻射面上，超聲強度大，能夠快速將堵塞物去除，同時設備采用反過濾裝置，只要您提供波芯，我們就可為您提供整套清洗裝置。（該設備洗一根濾芯的時間為10—15分鐘）。適用于PP綿濾芯、活性炭濾芯、中空纖維濾芯陶瓷膜濾芯。

4、 Ultrasonic cleaning of filter cartridges: We know that filters of any material or purpose will be scrapped due to reduced permeability caused by impurities after use for a period of time. Ordinary filter cartridges are relatively cheap, but for the chemical fiber industry, a single inlet filter cartridge costs nearly ten thousand yuan. It is a pity to abandon it. The ultrasonic filter cartridge cleaning machine developed in cooperation with other scientific research units uses a concentrated energy ultrasonic cleaning machine, which can concentrate more than 1KW of energy on a 200 × 20mm2 radiation surface. It has high ultrasonic intensity and can quickly remove blockages. At the same time, the equipment uses an anti filtration device. As long as you provide a wave core, we can provide you with a complete cleaning device. The time for washing a filter element on this device is 10-15 minutes. Suitable for PP cotton filter, activated carbon filter, hollow fiber filter, ceramic membrane filter.

五、超聲波對金屬的清洗：眾所周知，金屬棒材經擠壓成絲后，金屬絲的外部往往有一層碳化膜和油，用酸清洗或其它清洗方法，很難讓污物去除（尤其整盤絲），超聲波洗絲機是根據實際生產需要而設計的一種連續走絲，高效清洗設備，粗洗部分由清洗液儲槽、換能器、循環泵、過濾器及配套管道系統組成，金屬絲經超聲波粗洗精洗后，再經過吹干，從而完成整個清洗過程。整套設備集成控制，簡潔、方便、效果好，廣泛用于鉭絲、鎢絲、鉬絲、鈮絲、銅絲（絕緣漆涂覆前）等其它金屬絲。

5、 Ultrasonic cleaning of metals: As is well known, after metal bars are extruded into wires, there is often a layer of carbonized film and oil on the outside of the wire. It is difficult to remove dirt (especially the entire wire) using acid cleaning or other cleaning methods. Ultrasonic wire washing machine is a continuous wire walking and efficient cleaning equipment designed according to actual production needs. The rough washing part is composed of a cleaning solution storage tank, a transducer, a circulation pump, a filter, and a supporting pipeline system. The metal wire is cleaned by ultrasonic rough washing and fine washing, and then blown dry to complete the entire cleaning process. The entire equipment integrates control, which is simple, convenient, and effective. It is widely used for tantalum wire, tungsten wire, molybdenum wire, niobium wire, copper wire (before insulation paint coating) and other metal wires.

六、超聲波清洗技術在磷化處理中的應用：產品噴涂前處理工藝非常重要，一般的傳統工藝使用酸液對工件進行處理，對環境污染較重，工作環境較差，同時，最大的弊端是結構復雜零件酸洗除銹后的殘酸很難沖洗干凈。工件噴涂后，時間不長，沿著夾縫出現銹蝕現象，破壞涂層表

6、 The application of ultrasonic cleaning technology in phosphating treatment: The pre-treatment process of product spraying is very important. Generally, traditional processes use acid solution to treat workpieces, which causes heavy environmental pollution and poor working environment. At the same time, the biggest drawback is that the residual acid after acid cleaning and rust removal of structurally complex parts is difficult to clean. After spraying the workpiece for a short time, rust appeared along the gap, damaging the coating surface